Really Right Stuff

Elastomeric Bungee Ready Mount for Suunto SK7 Compass

A replacement “boot” or Mount for the Popular Suunto SK7 Compass. Long the favorite of serious divers, the SK7 compass will still operate even when tilted off level. The factory boot is not a favorite however, hard to don, and toooo tall.

This replacement mount is lower profile, and is designed to accept 1/8 in. to 3/16 in. diameter Bungee Cord. Bungee Cord mounted gauges are far easier to don than Buckled straps, and are depth compensating.

New version will work with both black & white friction rings.

Elastomeric Bungee Ready Mount for Uwatec Digital Bottom Timers, Aladin Tec2G, Aladin Prime and Subgear XP10

A replacement “boot” or Mount for the Popular Uwatec Digital Bottom Timers. These “Hockey Puck” style bottom timers are sold under several names, OMS, ScubaPro etc.

This replacement mount is lower profile, and is designed to accept 1/8 in. to 3/16 in. diameter Bungee Cord. Bungee Cord mounted gauges are far easier to don than Buckled straps, and are depth compensating.

This mount can be fitted with one continuous bungee, (as shown in the photos) or two separate loops for redundancy. Simple, secure, snap in installation, tough elastomeric material, remains flexible at low temperatures.

Update: (December 1, 2009)

DSS Spool

Molded Finger Spool w/ 75ft #24 line & all Stainless Double end bolt snap

Delrin Thumbwheels (pair)

Tired of Metal Wing nuts? Small and easy to loose, requires a loose washer, hard to get tight, don’t work if the male thread is not perfect, seizes easily, hard on exposure suit………. Stainless Wing Nuts are easy to hate! No washers required, flat or lock.

Molded from Delrin DeepSeaSupply’s thumbwheels are an all plastic replacement for Metal Wing Nuts. Tested to over 2000lbs each. These Delrin Thumbwheels won’t seize, even if the males threads aren’t perfect, offer a much larger diameter for hand tightening and removing, and are lower profile with no sharp edges.

Designed for securing Banded Double Tanks or Single Tank Adapters to Back Plates.

Q-Tach Retainers, Pair (fit DSS plates only)

The Q-Tach Retainers make the Delrin Thumbwheels “Captive”

The Q-Tach Retainers are secured to the back plate (may not fit all makes of Back Plates) and accept the Delrin Thumbwheels. No more loose wing nuts to lose. Also molded from tough, springy Delrin, the retainers snap on to the Delrin Thumbwheels. Different size thumbwheels can be fitted in seconds.

Furnished with required hardware.

Elastomeric Wedge Blocks, one pair. For use with DSS backplates only.

Helps secure tank to bcd system.

8.1 Lbs Bolt on Weight Plates, Medium SS (other sizes/weights available)

8.1 lbs bolt on weight plates for medium Stainless Steel Backplates, with hardware

Plates attach to the tank side of the back plate.  Plates are easily removed or installed without disturbing the harness.

Precision Waterjet cut from 3/8” 304 Stainless Steel.  Waterjet cut to match the contour of the plate, the DSS Weight Plates permit easy access to harness webbing slots and single tank slots.

Low profile SS button head allen machine screws secure the weight plates to the back plate. Required hardware is furnished.

Manufactured by Deep Sea Supply USA. 

We have a complete line of technical diving accessories:  hogarthian harness system, regulator hoses with proper lengths, spools, reels, necklace for backup reg, stainless steel bolt snaps and double ended bolt snaps.  For sales, call or e-mail.

Hydrofit Scuba (Philippine Distributor)
117 Mauban Street, Barangay Manresa, Quezon City 1115, Metro Manila, Philippines
Tel: 63(2)4044805; 63(918)9263262